Based spec:
Interface: SATAIII
Dimensions: 100 * 70 * 7 mm
Capacity: 60GB
Flash Type: MLC NAND Flash
Read / Write Performance:
Sequential Read: up to 480 MB / s
Sequential Write: Up to 100 MB / s
4KB Sequential Read IOPS: 10242
4 KB Sequential Write IOPS: 27129
9999: 4K Random Read IOPS 4KB Random Write IOPS: 483
Response Time: 0.1 ms
Power consumption:
Power supply: 5V + 5% Standby: 0.3 W
Maximum Ripple: 70 mV (peak to peak)
4KB Random Write: 2.5W
Reliability:
Write endurance: 8 years @ 100G write / day (32G)
Read endurance: unlimited
MTBF:
> 2,000,000 hours Data retention:> 20 years
at 25 ℃ Data not destroy
support Sudden power-off recovery support
Support SMART, NCQ, Trim and dynamic power management.
Static and dynamic wear-Leveling-
Bad block management algorithm
ECC: Supports BCH ECC bits 12/14/40 1024 bytes
Product Specifications:
1) Dimensions:
Parameter value
100 +/- 0.3 mm: length
70 +/- 0.3 mm width Height: 7 +/- 0.1 mm
Table 3 Physical Dimensions of the driver
2) interface mode:
The interface of the 2.5 "SATA SSD conforms to the standard Serial ATA version 3.1:
Host transfer rate is 600 MB / s (6.0Gb / s) - Read / Write
PIO mode 0,1,2,3,4
DMA Mode 0,1,2
UDMA mode 0,1,2,3,4,5
Package include:
60 GB SSD
Warranty: 3 months & 3 years; Please contact us if you experience any issues with the product and we will happily setup a return for a full refund.
Interface: SATA III
Flash Type: MLC NAND Flash
Capacity: 60GB
Dimensions: 100 * 70 * 7 mm